Self-Leveling Concrete & Overlays in Titusville FL - a flat floor, covered or polished
Uneven, dipping floors can be poured flat again, ready for new tile or vinyl, or polished and sealed as the floor itself.
Request an estimate
How do you fix an uneven concrete floor in Titusville?
Self-leveling concrete is a pourable layer we spread over your existing floor in Titusville, FL to fill dips and even out slopes. Once it dries, it becomes either a flat base for tile, wood or vinyl or, if we pour a polishable overlay, the finished floor itself.
Most calls start with a floor that makes new tile rock, a low spot that holds mop water, or a slab left ridged after old flooring came up. The price mostly turns on how much floor there is, how deep the low spots run, how much old glue or coating has to come off first, and whether you want a polished finish or a base with a new floor covering on top. The schedule turns on the slab check and on how long the pour needs to dry before anything goes over it. Prep is where I'd rather spend the time, so concrete grinding and surface preparation is often part of the job. When I come out, I look at the slab and leave you a written scope you can hold up next to anyone else's.
How our crew does self-leveling concrete and overlays
First we settle whether the leveler is your finished floor or a base for tile or vinyl, because that decides which material we pour. Then I test the slab for moisture and we mark any cracks that move, since both can change the plan before a bag gets mixed. Our crew grinds the surface so the leveler has something to grip, cleans it and primes it, then mixes and pours in one steady run so the layer flows together and finds its own level. Once it's dry, we either diamond-polish and seal a polishable overlay or hand the room back flat and ready for tile or vinyl.
Two jobs often come before or beside this one. If old tile, carpet glue or a failed coating is still stuck to the slab, concrete floor stripping and removal gets it off first, because a leveler only holds to clean concrete. And if what's rough is the deck around your pool rather than a floor inside, that's our pool deck coatings and resurfacing work, which uses different products.
Permits and licenses for self-leveling concrete in Titusville
In Titusville, the City of Titusville Building Department issues permits and runs the plan reviews and inspections, and whether your leveling job needs a permit isn't something I'll guess at, so that's the office to ask. When a job does need one, we handle the paperwork and inspections with the city or county office that covers your address, and we go over where that stands at the estimate. Contractors who register with the city send a state license or county competency card plus proof of liability and workers' comp coverage. The kind of license matters, because a Florida certified license is good anywhere in the state, a registered one only covers the places where that contractor holds a local certificate, and a Brevard County certified one stops at the county line. Outside city limits, the county licensing board oversees contractors working in unincorporated areas, so it's fair to ask anyone pouring your floor which license they hold and where it's good.
We're based in Titusville and work across Brevard County and into nearby parts of Orange and Volusia counties. Most floors we level around here are slabs poured right on the ground, where old tile came up unevenly or an addition doesn't quite meet the original floor, and we see the same kinds of slabs on jobs in Mims and Port Saint John.
Leveled and polished concrete floors
Get a written scope for your uneven floor
We reply within one business day, and most days I'm the one who picks up. Then I come out for a free on-site estimate, look at the slab, test for moisture where the job calls for it and leave you a written scope, with no pressure and no obligation.
(321) 335-1578Self-leveling concrete questions in Titusville
How much does self-leveling concrete cost in Titusville, FL?
Installed self-leveling compound on a concrete floor usually costs about $5 to $7 per square foot across the US, and that's what the market charges, not a quote from us. It covers the leveler put down, not the tile, wood or vinyl you'd lay over a standard underlayment. Deep low spots, heavy prep and a polished finish push a job higher, and your own number comes with the written scope at the estimate.
Can self-leveling concrete be my finished floor?
Yes, if it's a polishable overlay that gets diamond-polished and sealed, as described above. A standard underlayment won't hold up as a bare floor, which is why we decide this before anything else.
Will self-leveling concrete fix a damp concrete slab?
No, a leveler won't cure a damp slab. One leveler maker says its products aren't moisture control systems and calls for testing the slab's moisture to the flooring maker's requirements before leveling. That's why I test first, and if the readings come back high, we talk it through before anything is poured.
Will cracks in my slab show through a self-leveling overlay?
Cracks that move usually will. One leveler maker says moving joints and cracks carry up through the leveler and the floor covering, and a concrete industry guide says polymer overlays aren't meant to stop cracks coming up from below. So we mark the moving cracks before the pour and plan the floor around them instead of hoping they stay hidden.
How long does self-leveling concrete take to dry before I can put flooring down?
Longer in a cool, humid or closed-up room, because lower temperatures, higher humidity, poor airflow and thicker pours all stretch the drying time, according to one leveler maker. Plan a few extra days before tile or vinyl goes down if your house stays shut up. The same maker calls for air between 50 and 90°F while the material goes down and shade from direct sun, so we set up the room for that on pour day.
What is the best way to deal with old flooring glue before self-leveling?
Tell us about it before anyone grinds or scrapes, because old adhesive residue can contain asbestos, which makes removing it hazardous. One leveler maker says to consult the adhesive maker and the proper government agencies about removal, so we sort out what's on your slab before prep starts.
Get your Titusville floor checked and leveled
Call (321) 335-1578 or send the estimate form with the room size in square feet, what's on the floor now, and any cracks, damp spots or old glue, so I bring the right tests on the first visit.