Concrete sealing in Titusville FL - a protected slab and a plan for resealing
Old sealer peeling or worn thin on your driveway or patio? We reseal it in thin, even coats and tell you when it's due again.
Request an estimate
When does concrete need sealing, and how often?
Concrete sealing in Titusville, FL puts a protective coat on your driveway, patio, garage floor or pool deck. That coat is either a cure-and-seal product, which leaves a thin film on top, or a penetrating sealer, which soaks into the surface. Either way the coat wears away over time, so sealing is upkeep you come back to, not a job you do once.
At Northline Titusville Concrete Coatings, most sealing calls start with a slab that looks dull, patchy or chalky where the old coat has worn thin. The price mostly follows the square footage, how much cleaning or stripping the old sealer needs and which sealer suits your slab. The schedule turns on dry weather and on how long you can keep cars and furniture off the concrete afterward. You get your own figure in a written scope after we look at the slab.
How we handle concrete sealing
We start by sweeping and washing the slab and checking what's left of any old sealer, because new sealer only holds as well as the surface under it. Once the concrete is clean and dry, we put the sealer down in thin coats, since a heavy coat is where the problems usually start. We work in the cooler part of the day and out of direct sun, because hot weather and a sun-baked slab cause trouble with how sealer goes on. Before we pack up, I walk you through what to watch for, so you know when it's worth redoing and when it isn't.
Sealer protects a sound surface, but it won't fix a bad one. If your slab is scaling, pitted or patched, concrete resurfacing and overlays give it a fresh top layer worth sealing. If an indoor floor dips or runs uneven, self-leveling concrete and overlays can bring it flat first.
What changes concrete sealing in Titusville
In the city, permits and inspections go through Titusville's Building Department. We go over at the estimate whether your job needs one, and if it does, we handle the paperwork and inspections. The rule that changes a sealing job here is about water. Titusville makes it illegal to wash sidewalks or parking areas into a gutter or the storm drains unless all visible debris and sediment have been removed first. The city also makes it unlawful to let chemicals, degreasers, solvents, soaps or paints drain onto a street, storm drain, ditch or body of water. Breaking the city's storm drain rules can bring a fine, jail time or both, so we keep our rinse water and cleaners out of the storm drains.
Most of the sealing we do here is on driveways, patios and pool decks at single-family houses, and we see the same kinds of slabs on jobs in Port Saint John and Mims. We're based in Titusville and work across Brevard County and into nearby parts of Orange and Volusia counties, well beyond the cities named on this site.
Sealed concrete up close
Get a written sealing scope for your slab
Tell us roughly how many square feet you have, whether it's a driveway, patio or pool deck, and add a few photos if you can. We reply within one business day, and most days I'm the one who answers. Then I come out for a free on-site estimate, with no pressure and no obligation, and leave you a written scope you can hold up next to anyone else's.
(321) 335-1578Concrete sealing questions from Titusville homeowners
How long does concrete sealer last?
One maker's guide puts cure-and-seal products at about 1 to 3 years, with peeling and flaking showing up first in busy or sunny spots. The same maker advises resealing only once the earlier coats have worn away, so I'd rather you budget for it every few years than reseal on a calendar.
How much does concrete sealing cost in Titusville, FL?
Across the US, concrete sealing usually costs about $1 to $2.50 per square foot, and that's the market's range, not our price. Where your slab lands depends on its size, how much old sealer has to come off and which product it needs, and you get your own figure in a written scope after we look at it.
How long does concrete sealer take to dry before I can drive on it?
One penetrating sealer's instructions call for at least 4 to 6 hours before light foot traffic, and 24 to 48 hours before cars, furniture or heavy items go back on, based on 70°F and 50% humidity. Plan where to park and where the patio furniture goes for a day or two, and we'll tell you the wait for the product going on your slab.
Does sealing a driveway stop oil stains?
No, cure-and-seal products and penetrating sealers won't prevent stains, so oil and chemical drips from cars still need wiping up quickly. Sweeping leaves, tree debris and fertilizer granules off the concrete often is part of keeping a sealed slab looking right.
What is the best way to seal a salt water pool deck?
Plan on more upkeep than a regular patio, because one maker warns that salt water settings, including salt water pool decks, are harsh on sealers. Another maker advises testing the finished surface for slip resistance both wet and dry, which matters most around a pool, so we talk through the product and finish with you before anything goes down.
What is the best weather for sealing concrete?
One penetrating sealer's instructions allow it to go on only between 50 and 90°F, with humidity below 85% day and night and no rain expected for 24 hours. That's why a forecast can move our start day, and I'd rather move the day than seal ahead of rain.
Book a sealing estimate in Titusville
Call (321) 335-1578 or use the form for a free look, since half-worn sealer often isn't ready for a new coat yet and I'd rather tell you to wait than sell you one.