Basement flooring in Titusville FL - a floor matched to your slab's moisture
Damp spots, a musty smell or a floor that came loose? We test your slab first, then put down a floor that suits it.
Request an estimate
What's the right floor for my concrete slab?
Basement flooring in Titusville, FL is a finished floor laid over a concrete slab. We check the slab before anything goes down, because moisture from the ground can come up through concrete and ruin a new floor. We test first, then help you choose a floor the slab can handle, and that same reading tells us how much prep and cure time the job needs.
You might have a bare slab in a lower room, damp spots that come and go, or an old floor lifting at the edges. The price depends on the size of the room, how much grinding and patching the slab needs, what the moisture reading shows and which floor you choose. The schedule mostly depends on that reading and on cure time, because some floors can't go down until the slab and each coat are ready. After I look at the slab, you get a written scope with your own figure that you can hold up next to anyone else's.
How we put in basement flooring over a slab
When I come out, I confirm the space with you, because we treat basement flooring as flooring over a concrete slab, whatever the room is called. Then I test that slab for moisture and let the reading guide which floor makes sense, since a floor the slab can't support will fail from underneath. Once you've picked a floor, our crew grinds the surface to open up the concrete so the new floor can grip, then fills cracks and low spots. I check that prep before any coating goes down. After that, the crew installs the floor, lets it cure and cleans up.
Most of this job is prep, so concrete grinding and surface preparation is part of almost every basement floor we do. We also offer it on its own when you only need old paint or glue taken off. If you'd rather keep the concrete as your floor, concrete sealing gives a bare slab a protective layer that's easier to keep clean.
Basement flooring in Titusville and the rules that apply
In Titusville, the city's Building Department handles permits and the inspections that enforce city code, and the Floodplain Administrator handles floodplain permits. I won't guess whether your floor needs a permit before I've seen the job. When it does, we handle the paperwork and inspections with the city or county office that covers your address, and we go over where that stands at the estimate.
Water is the local factor that matters most for a slab here. Titusville has seen little structural flood damage, even in major storms, but the Indian River Lagoon and the St. Johns River and marsh can bring flooding in severe rain. The city will send you a free letter with the latest floodplain data for your parcel if you ask the Community Development Department, and the Floodplain Administrator answers flood zone questions. That letter is worth having in hand when we plan for moisture. We're based in Titusville and work across Brevard County and into nearby parts of Orange and Volusia counties. Most of the floors we're called to in Mims and Port Saint John sit on a slab poured right on the ground, so we plan around ground moisture there too.
Concrete floors, prepped and finished
Get a slab check and a written floor scope
We reply within one business day to set a time for me to come out and look at your slab. The estimate is free, on site and comes with no pressure and no obligation.
(321) 335-1578Basement floor questions from Titusville homeowners
Do I need a moisture test before putting new flooring on a concrete slab?
Yes. Flooring makers generally require a moisture test before installing on concrete. Moisture that comes up after the floor is down can make it come loose, break it down and let mold and similar growth start underneath, and none of that shows until the floor is already in. A test only shows the slab's condition on the day it was done, so if someone hands you an old reading, ask when it was taken.
What causes flooring to fail on a concrete slab that looks dry?
A slab can look dry only because moisture coming up from the ground is evaporating into the room as fast as it arrives. Put down a floor that lets no moisture through, and that water can get trapped on the slab or in the flooring. That's why we go by the reading, not by how the concrete looks.
Can I just seal my concrete floor with epoxy paint to stop moisture in Titusville?
Often, yes. Epoxy paint on the slab is a low-cost, low-disruption way to deal with moisture coming through it. The bigger alternative, rigid insulation laid on top of the slab, is more work and takes away ceiling height. Epoxy won't keep a room from getting damp when poor grading, missing gutters or a high water table are letting serious water in, and if that's what I see, I'll tell you before we coat anything.
How much does luxury vinyl plank flooring cost installed in Florida?
Mid-tier luxury vinyl plank usually costs about $5 to $8 per square foot installed in Florida. That's the going rate across the state, not our price. On a slab, the moisture reading and the prep it calls for can push any floor's cost up or down, and our written scope shows your own figure. Satisfaction guaranteed on every job.
How do I check a flooring contractor's license in Florida?
Ask whether they hold a certified license, which is valid anywhere in Florida, or a registered one, which is valid only where they hold a local certificate of competency. That tells you whether they can work at your address before you sign anything.
What is the best way to put a warmer floor over a concrete slab?
On a slab in good repair with no liquid water on its surface, a national energy guide describes laying sheets of extruded polystyrene foam, a rigid insulation board, right on the slab. A plywood floor is then floated over the foam, which means it rests on the foam without being fastened down to the concrete. It's an option to weigh, and the slab check tells you whether it's on the table.
Get your Titusville slab tested first
Call (321) 335-1578 or use the form with your room size, the floor you have in mind and any damp spots you've noticed, so the first visit covers what matters.